Back to All Events

Roof Tune Up

  1. Inspect 100% of the roof surface.
  2. Refasten all loose sheet metal transitions and apply a three course repair where applicable
  3. Cut out blistered areas and apply a torch down patch.
  4. Seal all coping transitions.
  5. Seal all fastener attachment points on the termination caps.
  6. Inspect all HVAC duct transitions - seal any cracked transitions.
  7. Seal all cracked seals on the pipe penetrations.
  8. Seal all guardrail post penetrations.
  9. Clean out the drain areas and seal the transitions.
  10. Clean off the roof and gutters.
  11. Remove all debris from site.